Wally Tool

return to main page

return to LINE CARD

: This is the isle with Wally taps. There are M3, M7, Vanadium, M-42, T-15, and carbide taps. Plug, spiral point (SP) plug, bottom, SP bottom, modified bottom, taper chamfers in stock! In stock are cutting taps, cold forming "rool" taps and the "drill&tap" style. There are straight flute, slow spiral flute, fast spiral, left hand spiral (for hard to tap material). We have general purpose taps, taps for aluminum, brass, hard or mold steels, soft stainless steels, inconel, titinum, work hardening materials, and plastics. The surface treatments in stock are bright (none), nitrite, oxide, nitrite/oxide, hard chrome, TiN, Sossner's Electeo-Lube (EL), and Sossner's NeL (EL over nitride). There are geometric style thread chasers, and die heads also.; We have inch from #000-120 to 2", (UNJ tap, dies and gages are on another isle, not enough space on this one.) metric from M1 to M56. Inch H# from H1 thru H11. There is even some modified Wetwirth ( British 55º).We love to find and stock the hard to find sizes, SO YOU can BUY them!.; Well that covers the isle, on the back there are the pipe taps. That is to say NPT, NPTF, NPS, true metric pipe taps, BSPT, BSPP. We have them in and for the same materials as regular the taps.; AND you thought I was done typing! Well lets not forget the long taps. They come from Reiff & Nester, Brubaker, OSG, Sossner, Western Tap, and a few imports. IN stock from 4", 6" and a few 8", pulley, nut, extenision, and extension with reduced shank.; Well lets not forget the thread files, the ones your familiar with but also the ID style from Warren file.; Did I leave out left hand taps? Well we didn't, there here for the most part, inch and metric. (99%); (11 shelves, 18 inches deep per section, 6 sections 4 feet wide and one section 3 foot wide on the back.)
WE HAVE TAPS!: For picture of BT, Cat, NMTB, taper holder isle; For picture of MTI isle; For picture end mill isle; return to Wally Pic Page